Chillers Made Simple: Finding the Perfect Fit for Your Plunge

Selecting the right chiller isn’t as simple as checking the liter count. It’s about the total water volume in your system and how the chiller handles it. Pick one too small, and it won’t cool effectively. Choose one too large, and you’re wasting energy and money. The goal is to match the chiller to your needs precisely.

A Helpful Comparison: Commercial Freezer vs. Home Fridge

Imagine installing a huge commercial refrigeration unit just to cool your kitchen fridge—it’d be ridiculous and excessive. Now picture using a tiny home fridge compressor to keep a walk-in freezer cold. It’d overwork itself and fail fast. Chillers follow the same principle, scaled to water volume.

• For a small cold plunge under 1000 liters, think of it like a home fridge. It requires 3-5kW of cooling power to maintain low temperatures consistently.
• A larger plunge, between 1000 and 3000 liters, is more like a walk-in freezer. Once cooled, it retains that chill longer, but more water and frequent use—like multiple swimmers—mean you need 6-17kW, depending on your target temperature and how many people are hopping in.
• High-volume setups, from 2000 to 5000 liters, build on that. The greater the water volume and the more heat introduced (say, from warm bodies or sunlight), the stronger the chiller you’ll need to keep temperatures steady.

Choosing incorrectly causes problems. A chiller that’s too small runs constantly, wearing out quickly and failing to keep the water cold. One that’s too big turns on and off too often—a process called short-cycling—which wastes power and shortens its lifespan.

Why a Small Chiller Can’t Handle a Big Job

Some people assume they can buy a small chiller and run it longer to cool a larger pool. That’s a mistake. Chillers are designed for specific capacities. A 3-5kW unit meant for 1000 liters will struggle or break down if forced to cool 2000 liters or more. Operating it at maximum effort all the time wears it out fast. A properly sized chiller, on the other hand, works in steady cycles, cooling efficiently without overstressing itself.

Planning Ahead Saves Money

If you’re thinking about expanding your setup—adding another plunge, increasing the number of users, or introducing contrast therapy (hot and cold water cycling)—you need to consider that now. Most commercial chillers are built to handle a set water volume. If you increase that volume later, say by doubling it in a year, you can’t just tweak the existing chiller to keep up. In most cases, you’ll need to replace it entirely with a bigger unit. That’s an expensive fix. Instead, if expansion is possible, invest in a chiller today that can manage the larger volume you might need tomorrow. It’s cheaper than buying twice.

How to Pair Water Volume with Chiller Power

Here’s a clear guide to sizing:

• Under 1000 liters requires 3-5kW of cooling power to hold low temperatures.

• Between 1000 and 3000 liters needs 6-17kW, depending on your desired temperature and how many swimmers use it.

• From 2000 to 5000 liters, you’re still looking at 6-17kW, but larger water amounts and higher heat loads (like more users or warmer climates) mean you’ll need a chiller on the stronger side of that range.

The Takeaway: Match It Right from the Start

Larger water volumes can stay stable when cooled properly, but they need the right chiller to get there. A small unit pushed beyond its limits fails fast. A poor choice now leads to a costly replacement later. If you’re unsure what your system demands, don’t rely on guesswork or liter counts alone—consult someone who understands heat load and cooling capacity. Our engineers can assess your setup and pinpoint exactly what you need, ensuring you’re set up for success the first time.