Bergs

Trusted by Recovery Rooms Across Australia

Why Bergs?

See The Range

Performance Guarantee

If our chiller doesn't do what we say it will do, we'll upgrade it at our cost or give you your money back

Reliable

Say goodbye to constant breakdowns and lost revenue. Bergs Chillers are built to last

Industrial Grade Components

We use the same Australian components used on cooling systems for major shopping centres and commercial buildings

Built for Recovery Rooms That Are Frustrated

Not every city has the ambient temperature of Hobart, so why are all the chillers available in Australia manufactured for that?

Recovery room owners tell us the same stories—living on edge waiting for the next breakdown, watching your chiller struggle as soon as it hits 25°C, losing hundreds a day to cancelled sessions.

We built ours to hit 5°C at 50°C ambient—bloody cold. With industrial-grade dual compressors and a split system—no noise, no heat inside. That means no more constant breakdowns and lost revenue, back-to-back sessions all summer, and no need for extra ice.

ueLoad video:

Roar Active

The Challenge: Four previous chillers failed to maintain temps - couldn't support a full recovery facility.

The Solution:

  • Chiller: Adonis Split System
  • Setup: 3 ice baths + ice showers + 2,500L balance tank (5,500 litres total)
  • Target temp: 3-5°C constant
  • Installation type: New build

The Result: Hitting target temps across all zones - hasn't wavered since day one.

Gav's Story

By the time Gav reached out to Bergs, he'd already been through four different chiller companies. None of them could deliver what Roar Active needed for their new Oasis facility in Bibra Lake - a proper recovery setup with three ice baths, ice showers, and a 2,500-litre underground balance tank. The brief was simple but demanding: 5,000 litres of water held constantly between 3-5°C.

When Gav spoke with us. we worked together to design a system that would actually achieve the goal. Bergs had the data, the planning evidence from previous jobs, and the confidence to guarantee they'd hit those temps.

Three months from first contact to installation. The system fired up and immediately hit the mark. Everything from the ice baths to the showers runs off the same chiller, and it hasn't missed a beat. The temps stay exactly where they need to be - between 3-5°C, all day, every day.

See the chiller they used

Calculate Which Chiller You Need

Have a play with the calculator below.

It takes into account the major factors required when choosing the right chiller - and you can see how different conditions affect the chiller.

And if you have any questions at all, just give James a quick call on +61439393402.

Ice Bath Chiller Calculator

300L 1000L 2000L 3000L 4000L 5000L 6000L 7000L 8000L
5°C 10°C 15°C
8 200 400

Averages to 10 swimmers per hour over an 8-hour period

1 2 3 4 5 6

Will the chiller serve one pool or multiple pools?

Please enter a valid email address

(The page will refresh with your results)

Recommended Chiller:
The Double
Your requirements exceed our standard models.

Based on your inputs:

Pool Size: 2000 Liters

Number of Pools: 1

Desired Temperature: 10°C

Daily Swimmers: 80

Sauna Users: No

View This Product Contact Us for More Information
Redirecting to product page in 10 seconds...
Click "View This Product" to go now
ueLoad video:

Powerhouse Performance & Recovery

Project Overview

The Challenge: Existing units couldn't get pools below 13°C - too warm for effective cold therapy.

The Solution:

  • Chiller: Adonis Split System
  • Setup: 3 pools (8,000+ litres total)
  • Target temp: 7.5°C (originally set to 5°C - too cold!)
  • Installation type: Retrofit

The Result: Set-and-forget operation - hasn't needed adjustment since installation.

Earl's Story

When Earl from Powerhouse opened his recovery facility, he thought he'd sorted the cold plunge situation. He hadn't. The units he'd installed - "heat units" as he calls them - couldn't push below 13°C no matter what he tried.

That's when he reached out to Bergs. The response was immediate, and more importantly, familiar: "We've seen this before, and we're here to help." After looking at the data and understanding the setup, the solution was clear - an Adonis Split System that could handle three pools and over 8,000 litres.

The installation was smooth. The chiller fired up and hasn't been touched since. Earl had to raise the temperature from 5°C to 7.5°C because it was getting too cold. These days, it just hums away in the background, doing exactly what it's supposed to do.

See the chiller they used
ueLoad video:

World Gym

Project Overview

The Challenge: A brand new recovery area with an ice bath that's always cold, without the chiller headaches he'd had in past installs.

The Solution:

  • Chiller: Adonis Split System
  • Setup: 1 large cold plunge pool (5,000 litres)
  • Target temp: 10°C
  • Installation type: New gym build

The Result: Reliable system that works - members happy, no breakdowns.

Luke's Story

Luke owns 5 World Gyms and was adding recovery facilities to his Tuggerah location. The problem was, every conversation he had with suppliers felt the same - lots of promises, but no one confident enough to guarantee their gear would actually work. The equipment they'd tried wasn't up to standard, and members were getting frustrated.

After seeing Bergs on Instagram and having a conversation with the team, something clicked. We weren't just selling him a chiller - we walked him through exactly how the split system would work, why the parts were readily available, and guaranteed it would do the job. His business partner knew enough about cooling systems to know it made sense.

Delivery was quick. Installation was straightforward - even the installers commented on how easy it was to set up. Since then it just works. No breakdowns, no service calls, no unhappy members. Just a reliable system doing exactly what it's supposed to do.

Since the Tuggerah install, Luke's added another Bergs Split System to his World Gym location in Prospect, Sydney.

See the chiller they used
Bergs chill harder than a polar bear in an ice museum

After 6 months of struggling with a heat pump that only reached 13-14°C, we found James from Bergs through Instagram. His customer service was beyond anything I'd experienced in Australia for many years. Within a day of installing the Bergs chiller, our cold pools went from 14°C down to 5°C and are holding temperature with ease. I highly recommend anyone with cold plunges to reach out to James, he will point you in the right direction and be a genuine gentleman to you.

— Earl PrettyPowerhouse Gym

"Best ice bath chiller in Australia 100%"

— Luke GlassfordWorld Gyms Australia

Amazing bunch of guys. Great product and awesome communication. Can’t fault the service or the speed. Helped us through every step of the way. Can’t recommend the guys or the products high enough. Well done! 💪🦁

— Cam MunrowdRoar Active

We kept hearing the same story from recovery rooms - their chillers just weren't keeping their pools consistently cold.
Bergs chillers have proven to be the reliable solution for any set up that our clients consistently request.

— Russell Fagan

With over 10 years in the industry, I can say Bergs chiller system sets the benchmark for commercial ice bath installations.
They’re built to last, incredibly easy to install and they’ve made sure the ongoing maintenance is a breeze.

— Matt Millican

James’s professionalism, dedication and service is second to none. I can highly recommend him, he’s great to work with.

— Daniel NugentCommercial FItouts

Have had the pleasure of installing multiple systems for the guys now and when I say you will not have a better quality product that’s delivered from a company that is so prompt and transparent, I challenge you to find better.

— Cam FoleyFoley HVACR